Minebea MPC-201-25, Instruction Manual, Page: 10 / 124

VIII
Revision History
Date Manual No. Revision reason (details)
December
2014
DRW. No. 294-1697
1st issue
July 2015 DRW. No. 294-1697A
In accordance with ECN No. FN15-02028.
Section 5-2-2: Added precautions.
Changed sensor cable label diagram in Section 9-1-2.
Changed ejector pin diameter and pressure conversion table
and description.
Section 19-1: Corrected numbering of reference items in table.
Section 21-2: Corrected measurement range from 0 MPa ~ 200
MPa to 0 MPa ~ 999.99 MPa.
Corrected other errors.
In accordance with ECN No. FN15-02064.
APP Ver.1.100 and ROM Ver.1.014 or later
Changed screen images following application version upgrade.
Beginning, Section 3: Added precautions.
Section 5, Section 5-4: Added precautions.
Section 6: Removed all "*" symbols in flowchart (7).
Section 8-1: Corrected item numbers.
Section 8-1 (2): Removed "Data processing" and "Statistics".
Deleted "* To use statistics, first stop loading data."
Section 8-1 (7): Changed description.
Section 8-6: Changed description.
Added Section 8-6-2 "Adjust Scale Automatically".
Section 9-1-1: Changed overlay description.
Section 9-1-2: Corrected errors, and added peak over eject
force calculation method.
Section 9-1-4: Added start trigger interrupt setting description
and precautions.
Added Section 9-2-6 "Alarm Signal Output Settings".
Section 9-5: Added precautions.
Added Section 10-3-2 "Adjust Scale Automatically".
Section 10-3-3: Added precautions.
Section 12 (1): Added description, alarm record settings, and
precautions.
Added Section 17 "Check ERROR LED Details".
Section 18-2: Added "Alarm record settings" item and
precautions.
Section 19: Added "Software Condition Setting Precautions".
Section 21: Expanded troubleshooting details.