Minebea Intec PR 5211 Series, Instrument Manual, Page: 76 / 96

7.3.1 Configuration parameters
7.3.1.1 Parameter 1: Analog output
Bit 7 Bit 6 Bit 5 Bit 4 Bit 3 Bit 2 Bit 1 Bit 0
Byte 0
Byte 1
Byte 2 Range Output mode
Byte 3 ADU in errorstate ADU below zero ADU above FSD
FSD = Full scale deflection
Analog output
Description Range/Signal Factory setting
Output mode off,
(func. 30)*,
Gross,
Net 0,
1,
8,
9 0
Analog range 0…20 mA
4…20 mA 0
1 1
ADU in
error state** hold
0 mA
4 mA
20 mA 0
1
2
3 1
ADU below zero Linear ***
0 mA
4 mA
20 mA 0
1
2
3 0
ADU above SKE Linear***
0 mA
4 mA
20 mA 0
1
2
3 3
* Output value 1 means that the value in function number 30 is written to the analog
output.
** The ADU error state is only valid if output value is set to gross (8) or net (9).
*** The linear selection can be used to get a proportional output signal outside the range
0 … FSD.
7.3.1.2 Parameter 2: Scaling weight value for 0/4 mA output
Bit 7 Bit 6 Bit 5 Bit 4 Bit 3 Bit 2 Bit 1 Bit 0
Byte 0 WEIGHT MSB
Byte 1 WEIGHT MSB
Byte 2 WEIGHT MSB
Byte 3 WEIGHT LSB
Transmitter Series PR 5211 7 ProfiBus interface
Minebea Intec EN-74