MP 26/10
Installation and Calibration Manual
Minebea Intec
EN-26
4.5.
Setting the Low pass Filter and Bandwidth
Filter Time
A first order mathematical low pass filter with adjustable time constant and bandwidth is
built-in. The time constant of the filter must be greater than zero. Normally higher values
result in good suppression of disturbances, but in an increased delay of the input signals, i.e.
the weight updating on the display will be slower.
Bandwidth
The bandwidth is the adjustable tolerance around the measured value within which the filter
is active.
Measurement value changes in excess of the adjusted bandwidth are not filtered.
