MP 26/10
Installation and Calibration Manual
Minebea Intec
EN-33
6.
Possible Error & its Remedies
6.1.
General
In this chapter the possible errors and its remedies are discussed.
The error in the device is identified by a marker over the E in
display line 2 as shown in figure. Errors can be viewed by
pressing
the
key
.
If there are still more errors it can be viewed by successively
pressing the enter key.
For example When an alarm is still pending, i.e. unless the error cause was removed (bar over E
blinks)
E- Display
Description
Remedy
Blinks
Alarm due to existing error
- Determine the error type in the error
list via the error number.
-
Remove error.
on
Error removed, Alarm not
acknowledged
- Acknowledge alarm in the error list by
pressing the up or down key.
-
The alarm entry is deleted.
off
No error, all alarm entries deleted.
