4. Device installation | 4.3 - Hardware construction | 34
Technical data (continued)
Description
Data
Transfer rate
10 Mbit/s, 100 Mbit/s, full/half duplex, auto-detec
tion
Default IP address
192.198.0.100, DHCP is switched on
Subnet Mask
255.255.255.0
Connection mode
Point to point
Potential isolation
yes
Cable type
CAT 5 patch cable, twisted pair, screened
Cable impedance
150 Ω
Cable length
max. 115 m
4.3.2 RS-485 interface
The device is equipped with an integrated RS-485 interface. The interface can
be configured by software.
The connection diagram is located on the right side of the housing.
Technical data
Description
Data
External Connection
4-pin plug connector
Number of channels
1
Type
RS-485, full duplex
Transfer rate [Bit/s]
300, 600, 1200, 2400, 4800, <9600>, 19200
