6. Operating | 6.3 - WEB menu | 80
–
LC output impedance
Only by selection "All load cells same"
Input: from the calibration certificate of the load cell under "Output
impedance"
–
LC 1…8 output at max. capacity
Only by selection "Each load cell specific"
Eingabe: from the calibration certificate of the load cell under "Output
at max. capacity"
–
LC 1…8 output impedance
Only by selection "Each load cell specific"
Input: from the calibration certificate of the load cell under "Output
impedance"
6.3.2 Application settings
Limits
·
–
Limit 1…3 on
Input: Weight value
–
Limit 1…3 off
Input: Weight value
6.3.3 Interfaces
Serial Interface
·
–
Protocol
Selection: Kein, Fernanzeige, SMA, Modbus-RTU
–
Baud rate
Selection: 300, 600, 1200, 4800, 9600, 19200 baud
–
Data bits
View: protocol-dependent
–
Parity
View: protocol-dependent
–
Stop bits
View: protocol-dependent
Digital Inputs & Outputs
·
–
Input 1…3
Selection: None, Set zero, Set tare, Reset tare
–
Output 1…3
Selection: None, ADC error, Limit 1, Limit 2, Limit 3, Tare active
