Mindray PM-60Vet, Operator'S Manual

Page: 61 / 96

7-5
„ Press the Left button to enter the [
Trend Setup
] menu. In the [
Trend Setup
]
menu, you can
‹ Select [
Select ID
] to review the history data as well as the maximum,
minimum and average measurements of the selected paitent.
‹ Select [
Delete Selected
] to delete the trend data under the selected
animal ID.
‹ Select [
Delete All
] to delete the trend data under all animal IDs.
„ Press the Right button to exit the trend window.
7.3 Data Exporting
7.3.1 Real-time Exporting
During SpO
2
measuring, you can export the data in real-time through the infrared port.
To do so, follow this procedure:
1. Select
[
Menu
] → [
System
].
2. Select [
RT Export
] and toggle between [
Start
] and [
Stop
].
When the data is being exported in real-time, the symbol will be shown in the
information area. You can enter the trend exporting window when data is being exported
in real-time. In this case, real-time data exporting will stop automatically. If you need to
export the real-time data again, manually adjust [
RT Export
] to [
Start
].
The real-time data transmission protocol has the following features:
„ The baud rate is 9600;
„ The data frame format is one start bit plus eight data bits plus one stop bit;
„
The data sending rate is 1 Hz and the packet head is F1H.