4-5
4.7.2 Setting the Key Volume
To set the key volume,
1. Select
[
Menu
]
→
[
General Setup
].
2. Set
[
Key Vol
] to a value between 0 and 10. 0 means the key volume is turned off,
and 10 is the maximum volume.
4.8 Entering/Exiting the Demo Mode
To enter the demo mode:
1. Select
[
Menu
]
→
[
System
]
→
[
Maintenance >>
]
→
enter the required password.
2. Select
[
Demo
] and follow the prompt.
In the demo mode, the message [
Demo Mode
] is shown in the technical alarm area. To
exit the demo mode, press the Right button to return to the screen displayed before you
enter the demo mode.
WARNING
z
The Demo mode is for demonstration purpose only. To avoid that the
simulated data are mistaken for the monitored patient’s data, you should
not enter the Demo mode during a patient is being monitored. Otherwise,
improper patient monitoring and delayed treatment could result.
4.9 Checking the Version
To check the version information,
1. Select
[
Menu
]
→
[
System
]
→
[
Maintenance >>
]
→
enter the required password.
2. Select
[
Version >>
].
Summary of Contents for PM-60Vet
