Mindray PM-60Vet, Operator'S Manual

Page: 38 / 96

4-4
4.6 Setting the Clock
To set the clock,
1. Select
[
Menu
] → [
System
] → [
Maintenance >>
] → enter the required password.
2. Select [
Clock
>>], and then set [
Date
] and [
Time
].
3. Select [
Format >>
]. In the [
Format
] menu,
„ Set [
Date Format
] to [
yyyy-mm-dd
], [
mm-dd-yyyy
] or [
dd-mm-yyyy
].
„ Set [
Time Format
] to [
24 h
] or [
12 h
].
4 Press the Right button to return to the previous menu in the spot-checking mode, or
press the Right button and follow the prompt in the continuous monitoring mode.
NOTE
z
In the continuous monitoring mode, trend data of this mode may be
cleared if you change the clock.
4.7 Adjusting the Volume
4.7.1 Setting the Beat Volume
To set the beat volume,
1. Select
[
Menu
] → [
General Setup
].
2. Set [
Beat Vol
] to a value between 0 and 10. 0 means the beat volume is turned off,
and 10 is the maximum volume. When [
Beat Vol
] is set to 0, the icon is
shown in the PR area.
You can increase/decrease the beat volume by pressing the Up/Down button in the case
that no menu is opened.
During SpO
2
monitoring, the pitch of the pulse tone changes as the patient’s oxygen
saturation level changes. The pitch of the tone rises as the oxygen saturation level
increases and falls as the oxygen saturation level decreases.