Mindray PM-60Vet, Operator'S Manual

Page: 57 / 96

7-1
7
Data Management
7.1 Storing data
NOTE
z
The stored data will not be cleared in case of power failure or power off.
z
It's recommended to export the data before the memory is filled up.
7.1.1 Continuous Monitoring Mode
In the continuous monitoring mode, the data, including the measurement time, oxygen
saturation and pulse rate values, are stored once every 2 seconds. The pulse oximeter
can store up to 96 hours of data for a single animal.
In the continuous monitoring mode,
„ The initial animal ID is 1 when the pulse oximeter is used for the first time.
„
The range of animal ID is 1 to 99 and you have to change the animal ID
manually when a new animal is admitted.
„ The animal ID remains unchanged after all data is cleared in the trend
window.
„ The animal ID selected before the pulse oximeter is last turned off is
automatically loaded when you start the pulse oximeter.
During continuous animal monitoring,
„ The measurements are stored under the current animal ID as long as the
animal ID is not changed.