Mindray DICOM, Quick Manual

Page: 10 / 47

mindray
DC7 Diagnostic Ultrasound System
8
（
Sec
）
Timeout
（
Sec
）
Refers to the amount of time after which the system will stop trying
to establish a connection to the service.
Value: 5-60s, in increments of 5s, and 15 is default.
Cine Zoom
Mode
Original, 640*480 are optional, the default is Original.
Compression
Mode
Uncompressed(The image is uncompressed)
，
RLE(The image is
lossless compressed)
，
JPEG(Please refer to the information of
provider to confirm whether SCP can support JPGE compression. If
not, please don’t select it) are optional, the default is
Uncompressed.
Compression
Ratio
High, Middle and Low, three kinds of Compression Ratio are
optional. Compression Ratio is in inverse proportion to image
quality.
Color Mode
Three options are available, Color means the images sent from
system to server will be coded by 24bit, Mixed means the images
sent from system to server will be coded by 8bit or 24 bit depends
on whether the images themselves are captured in color imaging
mode or colorize switch is in “on” state or not, if they do so, will be
coded by 24bit, else 8bit. Gray means the images sent from system
to server will be coded by 8bit.The images will contain DICOM tags
window center (0028, 1050) and window width (0028, 1051) if they
are coded by 8bit. The default is Color.
Allow
Multiframe
If SCP supports this function, then select it.
Max Framerate 25,30,35, Full are available, user-changeable
Enable
Structured
Reporting
Select it when Structured Reporting is needed to send. You can
send the SR alone if the exams have no images.
Add Add the DICOM service to the service list.
Cancel Click to cancel parameter preset.
Update
Select an item in the service list, change the parameters in the
above area, and click [Update] to update the item in the service list.
Delete Click to delete the selected service in the service list.
Verify
Click to verify if the two DICOM application entities are normally
connected.
Default
Select an item in the service list, click [Default] and you can see “Y”
in the Default column.
Exit Click to exit the screen.
Tip:
JPEG is one of the storage types, but not all SCPs can support it. Please refer to
the electronic file DICOM CONFORMANCE STATEMENT to check whether SCP
supports this function.
AE Title and Port must be consistent with those of server.
Click the item in Service List to modify the parameters and click [Update] to update
them.