mindray
DC7 Diagnostic Ultrasound System
6
1.3
DICOM Server
The DICOM Server screen is used to add or delete DICOM servers, or set IP address for
the DICOM server.
To open the DICOM Server screen:
1. Press <F10> key to show the Setup menu. Move the cursor onto the [Network Preset]
item to show the submenu.
2. Navigate to select [DICOM Server] to open the screen, as shown in the Figure below.
Figure 3 DICOM Server Preset Screen
The main parameters of DICOM Server are described as below:
Name
Description
Device
Name of the device supporting DICOM services.
IP Address
IP address of the server.
Ping
Check whether IP Address can connect normally or not.
Add
Click to add server (s) to the Device List.
Delete
Click to delete the selected server (s) in the device list.
Tip:
The device name can be entered to your preference, but IP address must be the
actual IP address of the server.
If the currently entered name has already existed, the system will show a tip: “The
server name exists!” Click [OK] to enter another name.
1.4
DICOM Service
The DICOM Service screen is used to set attributes of Storage, Print, Worklist, MPPS,
Q/R and Storage Commitment.
To open the DICOM Service screen:
