Mindray BeneFusion uVP, Instructions For Use Manual

Page: 28 / 62

7 - 2
7.4 Intermittent Mode
NOTE
•
Total VTBI and Maintain Rate are optional parameters. If the Maintain Rate is
not set, infusion stops at the maintenance stage. If the Total VTBI is not set,
the infusion stops when the IV container is empty.
7.5 Ramp Mode
NOTE
•
The Steady Rate can only be obtained by calculation. It is not available for
manual input.
•
Up Time and Down Time are optional parameters. The pump runs an infusion
at the steady rate if they are not set.
7.6 Dose Time Mode
NOTE
•
In the dose time mode, the supported dose rate units are X/min, X/h, and X/
24h, in which X represents ng, ug, mg, g, mU, U, kU, EU, mmol, mol, mcal, cal,
kcal, and mEq.
•
Time can only be obtained by calculation. It is not available for manual input.
7.7 Rhythm Dose
NOTE
•
In the rhythm dose, the supported dose units are mg/kg and mg/m
2
.
•
The infusion parameters cannot be changed after the infusion is started.