Mindray BeneFusion uVP, Instructions For Use Manual

Page: 57 / 62

B - 7
TABLE EMC-5- Test specifications and minimum distances
Recommended separation distances between portable and mobile RF
communications equipment and the device
The system is intended for use in an electromagnetic environment in which radiated RF
disturbances are controlled. The customer or the user of the device can help prevent
electromagnetic interference by maintaining a minimum distance between portable and
mobile RF communications equipment (transmitters) and the device as recommended
below, according to the maximum output power of the communications equipment.
Portable and mobile radio communications equipment (e.g. two-way radio, cellular/
cordless telephones and similar equipment) should be used no closer to any part of this
system, including cables, than determined according to the following method:
Test
frequency
(MHz) Band
(MHz) Service Modulati
on Maximu
m power
(W) Distance
(m) Immunit
y test
level (V/
m)
385 380 - 390 TETRA
400 Pulse
modulati
on
18Hz 1.8 0.3 27
450 430 -470 GMRS
460
FRS 460 FM ±5
kHz
deviation
1 kHz sine 2 0.3 28
710 704 - 787 LTE Band
13,17 Pulse
modulati
on
217 Hz 0.2 0.3 9
745
780
810 800 - 960 GSM 800/
900, tetra
800, iDEN
820,
CDMA
850, LTE
Band 5 Pulse
modulati
on
18 Hz 2 0.3 28
870
930