Mindray BeneFusion uVP Instructions For Use Manual Download | Manualshive

Page: 4 / 62

background image

II

Intellectual Property Statement

SHENZHEN MINDRAY SCIENTIFIC CO., LTD. (hereinafter called Mindray Scientific) owns
the intellectual property rights to this product and this manual. This manual may refer to
information protected by copyrights or patents and does not convey any license under
the patent rights of Mindray Scientific, nor the rights of others.

Mindray Scientific intends to maintain the contents of this manual as confidential
information. Disclosure of the information in this manual in any manner whatsoever
without the written permission of Mindray Scientific is strictly forbidden.

Release, amendment, reproduction, distribution, rental, adaptation, translation of this
manual in any manner whatsoever without the written permission of Mindray Scientific
is strictly forbidden.

,

,

, and

are the registered

trademarks or trademarks owned by Mindray in China and other countries. Mindray
Scientific is authorized by Mindray to use above registered trademarks or trademarks.

Responsibility on the Manufacturer Party

Contents of this manual are subject to changes without prior notice.

All information contained in this manual is believed to be correct. Mindray Scientific
shall not be liable for errors contained herein nor for incidental or consequential
damages in connection with the furnishing, performance, or use of this manual.

Mindray Scientific is responsible for the effects on safety, reliability and performance of
this product, only if:

■

all installation operations, expansions, changes, modifications and repairs of this
product are conducted by Mindray Scientific authorized personnel;

■

the electrical installation of the relevant room complies with the applicable
national and local requirements;

■

the product is used in accordance with the instructions for use.

Warranty

THIS WARRANTY IS EXCLUSIVE AND IS IN LIEU OF ALL OTHER WARRANTIES, EXPRESSED
OR IMPLIED, INCLUDING WARRANTIES OF MERCHANTABILITY OR FITNESS FOR ANY
PARTICULAR PURPOSE.

«
...
2
3
4
5
6
...
»

Summary of Contents for BeneFusion uVP































































Reviews:

No comments

Related manuals for BeneFusion uVP

Brand: Water Factory Systems Pages: 15

FCD-JTHMG80-III

Brand: Haier Pages: 2

Little Sea-ox FCD-JTHC40-III (E)

Brand: Haier Pages: 6

Brand: Haier Pages: 18

Brand: Haier Pages: 23

Brand: Haier Pages: 20

Brand: Haier Pages: 2

Brand: Zehnder Rittling Pages: 64

Brand: T-MAG Pages: 36

Brand: Samoa Pages: 40

Brand: MasterCraft Pages: 8

Brand: Baker Hughes Pages: 78

Brand: T.I.P. Pages: 104

Krystal Clear SF90220T

Brand: Intex Pages: 112

Brand: KABI Pages: 6

Brand: Daewoo Pages: 16

Brand: Rolair Pages: 5

Brand: Bristan Pages: 20

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands