Mindray BeneFusion eSP Vet, Operator'S Manual

Page: 64 / 114

9 - 2
5. Select Import .
The pump loads the predefined infusion parameters from the drug library or the drug
info library after a drug has been selected.
If the pump is connected to the CMS via the Dock and wireless LAN, the drug library and
the drug info library can be imported to this pump via the CMS.
CAUTION
•
The facility is responsible for performing initial checks to ensure that the
proper drug library is loaded.
NOTE
•
The predefined parameters can be changed during a therapy. This does not
affect the embedded library.
9.2 Dose Error Reduction Systems (DERS)
DERS is for drug library only. If the predefined parameter limit is violated during a
therapy, the pump gives prompts.
9.2.1 Hard Limits
If the set rate, dose rate, or bolus rate exceeds the lower or upper hard limit configured in
the drug library, the setting will be rejected. Reconfigure the parameter as needed.
9.2.2 Soft Limits
If the set rate, dose rate, or bolus rate exceeds the lower or upper soft limit configured in
the drug library, you can choose to accept or reject the setting.
■
Accept the current setting: The current setting takes effect. The parameter that
exceeds the soft limit is marked with an orange background.
■
Reject the current setting: The pump returns to the previous menu, and you need
to make the setting again.
9.3 Predefining the Infusion Mode
You can predefine the infusion mode and corresponding parameters in the drug info
library. When the drug is selected, the pump automatically load the infusion mode and
corresponding parameters.