Mindray BeneFusion eSP Vet Operator'S Manual Download Page 4 | Manualshive

Page: 4 / 114

background image

II

Intellectual Property Statement

Shenzhen Mindray Animal Medical Technology Co., LTD. (hereinafter called Mindray
Animal Medical) owns the intellectual property rights to this product and this manual.
This manual may refer to information protected by copyright or patents and does not
convey any license under the patent rights or copyright of Mindray Animal Medical, or of
others.

Mindray Animal Medical intends to maintain the contents of this manual as confidential
information. Disclosure of the information in this manual in any manner whatsoever
without the written permission of Mindray Animal Medical is strictly forbidden.

Release, amendment, reproduction, distribution, rental, adaptation, translation or any
other derivative work of this manual in any manner whatsoever without the written
permission of Mindray Animal Medical is strictly forbidden.

is the trademark of SHENZHEN MINDRAY BIO-MEDICAL ELECTRONICS CO.,

LTD. in China and other countries. All other trademarks that appear in this manual are
used only for informational or editorial purposes. They are the property of their
respective owners.

Responsibility on the Manufacturer Party

Contents of this manual are subject to changes without prior notice.

All information contained in this manual is believed to be correct. Mindray Animal
Medical shall not be liable for errors contained herein nor for incidental or consequential
damages in connection with the furnishing, performance, or use of this manual.

Mindray Animal Medical is responsible for the effects on safety, reliability and
performance of this product, only if:

■

all installation operations, expansions, changes, modifications and repairs of this
product are conducted by Mindray Animal Medical authorized personnel;

■

the electrical installation of the relevant room complies with the applicable
national and local requirements;

■

the product is used in accordance with the instructions for use.

«
...
2
3
4
5
6
...
»

Summary of Contents for BeneFusion eSP Vet



















































































































Reviews:

No comments

Related manuals for BeneFusion eSP Vet

Brand: JB Systems Pages: 7

Brand: 3B SCIENTIFIC PHYSICS Pages: 36

Brand: 3A HEALTH CARE Pages: 16

Short/cut 2000 Audio Editor

Brand: 360 Systems Pages: 4

Brand: 3M Pages: 48

Brand: 3M Pages: 19

Speedglas G5-01

Brand: 3M Pages: 62

Quickfit Nexus Exit

Brand: Thomas & Betts Pages: 2

Brand: Fisher Scientific Pages: 42

Brand: AccuMed Pages: 14

Brand: TAS Pages: 25

Brand: Campbell Pages: 2

Brand: Parker Research Corp Pages: 4

Brand: Eastwood Pages: 20

Brand: Daihan Scientific Pages: 43

Brand: Jackco Pages: 6

Brand: Ofa Bamberg Pages: 80

Brand: R&S Pages: 371

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands