- v -
Never Do the Following
WARNING
During assembly
•
The pack of the device is as heavy
as approximately 200 kg.
Perform the assembly work by at
least four persons.
Do not disassemble or remodel the device.
•
Never disassemble or remodel the
main unit of the printer and the ink
cartridge. Disassembling/remodeling
any of them will result in electric
shocks or breakdown of the device.
Do not use the device in damp places.
•
Avoid damp environments when
putting the device into service. Do
not splash water onto the device.
High-humidity or water will give rise
to fire, electric shocks or breakdown
of the device.
Abnormal event occurs.
•
If the device is used under an
abnormal condition where the device
produces smoke or unpleasant
smell, fire or electric shocks can
result. Be sure to turn off the power
switch immediately and detach the
plug from the receptacle. Check first
to be sure that the device no longer
produces smoke, and contact a
distributor in your district for repair.
Never repair your device by yourself
since it is very dangerous for you to
do so.
Roll paper
•
Roll paper is heavy. Be careful not
to drop it. If you drop it on your
foot, or any other part of your body,
personal injury can result.
Power supply and voltage
•
Be sure to use the device with the
power supply specifications
indicated.
•
Be sure to connect the plug of the
power cable to a grounded
receptacle.
If not, fire or electric shocks can
result.
Handling of the power cable
•
Take care not to damage, break
or work on the power cable.
If a heavy matter is placed on the
power cable, heated or drawn,
the power cable can break to
cause fire or electric shocks.
Handling of ink cartridges
•
Store ink cartridges and waste ink
tank in a place that is out of the
reach of children.
•
If ink settles on the skin or
clothes, immediately wash it off
with detergent or water.
In the event that ink gets in eyes,
immediately rinse it off with water
and consult a medical doctor.
•
Neither pound the ink cartridge
nor shake it violently so as to
prevent leakage of ink.
•
Never refill the ink cartridge with
ink.
MIMAKI assumes no
responsibility for malfunction
caused by using the device after
replenishment of ink.
Summary of Contents for JV22-130
