MIMAKI JV22-130, Operation Manual

Page: 70 / 126

- 3.12 -
When not in use the plotter over the long term [CUSTODYwash]
When not in use the plotter over a week, perform “CUSTODYwash” function to clean the head
nozzle and ink discharge way. After performing the function, store the plotter.
When using the following ink, operating this function is recommended.
• Textile pigment ink (TPig)
• Reactive dye ink (Reac)
• Acid dye ink (Acid)
• If there exist cartridged with [NEAR END] and/or [INK END], the cleaning
function (suctioning through nozzles) is not activated. Replace cartridges
with [NEAR END] and/or [INK END], before operating this function.
Cleaning tool: Ink-Cleaning Kit (SPC-0137:option)
STEP
1. Press the [FUNCTION] key.
2. Press the [ ] or [ ] key to select [MAINTENANCE].
3. Press the [ENTER] key.
[STATION] is displayed.
4. Press the [ ] or [ ] key to select [CUSTODYwash].
5. Press the [ENTER] key.
The carriage moves to the platen.
6. Open the front cover.
7. Holding the projections at both ends, draw out
the wiper.
FUNCTION
SET UP
< ENT >
FUNCTION
MAINTENANCE
< ENT >
MAINTENANCE
STATION
< ent >
TATION
MENT : CUSTODYwash
Wiper Cleaning
COMPLETED
:ent