MIMAKI JV22-130, Operation Manual

Page: 30 / 126

- 1.14 -
Available media
This section describes the types of medium that can be used with the device and the method of
setting the medium used.
Available media type
The types of medium that can be used with the device are roll medium and cut sheet medium.
The types and sizes of medium that can be used with the device are explained below.
Detail information on available media type
Glossy medium : PET(gloss), Photo paper, Glossy PVC
Matte medium : Mat-PVC, Tarpaulin, Back-lit film
Cloth : Nonflamable cloth
Other : Artwork film, Canvas, Tarpaulin, Waterproof olefin film
Available media size
The size of medium varies according to model of the JV22 series.
Refer to the following table for the model used.
Medium Size JV22-130 JV22-160
Maximum 1371 mm 1620 mm
Mimimum 210 mm
Plotting width *1 1361 mm 1610 mm
Thickness 1.0 mm or less
Roll outside diameter Ø
180 mm or less
Roll weight 25 Kg or less. (Make sure no flexure on
the roll when holding up the roll.)
Roll inside diameter 3 or 2 inches
Plotting surface Faces OUT
Roll end treatment Light-adhesive tape is used to allow the
paper to be removed from the core with
ease.
Maximum 1371 mm 1620 mm
Minimum 210 mm
Plotting width *1 1371 mm 1600 mm
Roll medium
Cut sheet medium
*1 : Note, plotting width shortened in a high speed scan mode at 360x360,
360x540, and 360x720 dpi.
JV22-130 : 1321 mm
JV22-160 : 1570 mm