MIMAKI JV22-130, Operation Manual

Page: 77 / 126

- 4.5 -
Name Function
MEDIACOMP. Correct the amount of feed for media P.4-6
PRINT MODE Set the plot quality, plot direction, and logical seek P.4-6
INK LAYERS Set the number of over writing P.4-7
DRYING TIMES Set an ink drying time P.4-7
AUTO CUT Cut off the medium automatically at the end of plotting P.4-7
PRIORITY Specifies the value set (host /panel) P.4-7
MARGIN Set a dead space of the medium P.4-8
COLOR PATTERN Plots a color pattern for Nozzle clogging check P.4-8
REFRESH Refreshing the head during plotting P.4-8
MEDIA SET Set the method of the medium ditection P.4-9
VACCUM Set the absorbability of the medium. P.4-9
MM / INCH Set a unit of set values. P.4-9
STAMP Prints the date of output and plotting condition P.4-9
AUTO CLEANING Cleaning the head automatically†everytime plotting complete. P.4-9
AUTO CLEANING2 Cleaning the head automatically while plotting. P.4-10
HEAD HEIGHT Adjust the head height P.4-9
SETUP RESET Reset the currenct plotting conditions P.4-9
Setup functions
The following describes the overview of and settings for each function.