Milwaukee M18 FLAG230XPDB, Original Instructions Manual

Page: 20 / 162

18
GB
English
TECHNICAL DATA
Cordless Angle Grinder
M18 FLAG230XPDB
Production code 4678 90 01 ...
000001-999999
Battery voltage 18 V
Rated speed 6600 min -1
D= Grinding disk diameter max.
d= Grinding disk hole diameter
230 mm
22,2 mm
b= Cutting disk thickness min. / max. 1,9 / 3 mm
b= Grinding disk thickness max. 8 mm
D= Grinding surface diameter max. 230 mm
D= Wiring brush diameter max. 100 mm
Thread of work spindle M 14
Weight according EPTA-Procedure 01/2014 (Li-Ion 12,0Ah) 5,3 kg
Recommended Ambient Operating Temperature -18°C ... +50°C
Recommended battery types M18HB12
Recommended charger M12-18...
Noise information
Measured values determined according to EN 60745. Typically, the A-weighted noise levels of the tool are:
Sound pressure level (Uncertainty K=3dB(A))
79,7 dB(A)
Sound power level (Uncertainty K=3dB(A))
Wear ear protectors!
90,6 dB(A)
Vibration information
Vibration total values (triaxial vector sum) determined according to EN 60745
Surface grinding (Li-Ion 12,0Ah): Vibration emission value a
h,AG
Uncertainty K=
10,2 m/s 2
1,5 m/s
2
Disk sanding (Li-Ion 12,0Ah): Vibration emission value a
h,DS
Uncertainty K=
1,6 m/s
2
1,5 m/s
2
For other applications, e.g. Abrasive Cutting-Off Operations or Wire Brushing other vibration values could occur.
WARNING!
The vibration emission level given in this information sheet has been measured in accordance with a standardised test given in EN 60745
and may be used to compare one tool with another. It may be used for a preliminary assessment of exposure.
The declared vibration emission level represents the main applications of the tool. However if the tool is used for different applications,
with different accessories or poorly maintained, the vibration emission may differ. This may significantly increase the exposure level over
the total working period.
An estimation of the level of exposure to vibration should also take into account the times when the tool is switched off or when it is
running but not actually doing the job. This may significantly reduce the exposure level over the total working period.
Identify additional safety measures to protect the operator from the effects of vibration such as: maintain the tool and the accessories,
keep the hands warm, organisation of work patterns.