19
18
ONE-KEY™ Indicator
Solid Blue: Wireless mode is active and ready to be configured via
the ONE-KEY™ app.
Blinking Blue: Tool is actively communicating with the ONE-KEY™
app.
Blinking Red: Tool is in security lockout and can be unlocked by the
owner via the ONE-KEY™ app.
CLEANING
Clean dust and debris from openings. Keep handle clean, dry
and free of oil or grease. Use only mild soap and a damp cloth to
clean, since certain cleaning agents and solvents are harmful to
plastics and other insulated parts. Some of these include gasoline,
turpentine, lacquer thinner, paint thinner, chlorinated cleaning
solvents, ammonia and household detergents containing ammonia.
Never use flammable or combustible solvents around tools.
MAINTENANCE
Check that press jaws and the guide rollers move freely.
Clean and grease the press drives, locking bolts and press jaws
when you have finished work.
Service and repair work may only be carried out by authorised
specialist workshops.
The device contains hydraulic fluid. Hydraulic fluids pose a hazard
to groundwater. Uncontrolled draining or improper disposal is
punishable by law.
The next service deadline is indicated on the crimping device.
This service must be performed after 40.000 crimping operations or
at the latest when the LED display indicates that a service is due.
Replace worn press jaws and dies.
Use only Milwaukee accessories and Milwaukee spare parts. Should
components need to be replaced which have not been described,
please contact one of our Milwaukee service agents (see our list of
guarantee/service addresses).
If needed, an exploded view of the tool can be ordered. Please
state the Article No. as well as the machine type printed on
the label and order the drawing at your local service agents or
directly at: Techtronic Industries GmbH, Max-Eyth-Straße 10,
71364 Winnenden, Germany.
SYMBOLS
Please read the instructions carefully before starting
the machine.
CAUTION! WARNING! DANGER!
Remove the battery pack before starting any work on
the appliance.
Do not swallow the coin cell battery!
Always wear goggles when using the machine.
Warning! Danger of crushing!
WARNING! Danger of electric shock
Do not dispose of waste batteries, waste electrical and
electronic equipment as unsorted municipal waste.
Waste batteries and waste electrical and electronic
equipment must be collected separately. Waste
batteries, waste accumulators and light sources have
to be removed from equipment. Check with your local
authority or retailer for recycling advice and collection
point. According to local regulations retailers may
have an obligation to take back waste batteries and
Waste electrical and electronic equipment free of
charge. Your contribution to re-use and recycling of
waste batteries and waste electrical and electronic
equipment helps to reduce the demand of raw
materials. Waste batteries, in particular containing
lithium and waste Electrical and electronic equipment
contain valuable, recyclable materials, which can
adversely impact the environment and the human
health, if not disposed of in an environmentally
compatible manner. Delete personal data from waste
equipment, if any.
V
Voltage
Direct Current
European Conformity Mark
British Conformity Mark
Ukraine Conformity Mark
EurAsian Conformity Mark
ENGLISH
ADDITIONAL SAFETY AND WORKING INSTRUCTIONS
WARNING! To reduce the risk of fire, personal injury, and product
damage due to a short circuit, never immerse your tool, battery pack
or charger in fluid or allow a fluid to flow inside them. Corrosive or
conductive fluids, such as seawater, certain industrial chemicals,
and bleach or bleach containing products, etc., Can cause a short
circuit.
Never break open battery packs and chargers and store only in dry
rooms. Keep dry at all times.
Use only System M18 chargers for charging System M18 battery
packs. Do not use battery packs from other systems.
WARNING!
This device contains a button-type/coin
cell lithium battery. A new or used battery can cause
severe internal burns and lead to death in as little as 2
hours if swallowed or if it enters the body. Always secure
the cover on the battery compartment. If it does not close securely,
stop the device, remove the battery and keep it out of reach of
children. If you believe that someone has swallowed the battery or
that it has otherwise entered the body, seek immediate medical
attention.
SPECIFIED CONDITIONS OF USE
The crimping tool is exclusively designed for crimping connectors
and compound materials with dedicated crimping dies. All live
parts, i.e., parts conducting electricity, must be disconnected in the
technician’s work environment prior to starting work.
Do not use the product in any way other than those stated for
intended use.
RESIDUAL RISK
Even when the product is used as prescribed, it is still impossible
to completely eliminate certain residual risk factors. The following
hazards may arise in use and the operator should pay special
attention to avoid the following:
• Injury caused by vibration. Hold the product by designated
handles and restrict working time and exposure.
• Exposure to noise can cause hearing injury. Wear ear protection
and limit exposure.
• Injury due to flying debris. Wear eye protection, heavy long
trousers, gloves and substancial footwear at all times.
• Inhalation of toxic dusts.
NOTES FOR LI-ION BATTERIES
Use of Li-Ion batteries
Battery packs which have not been used for some time should be
recharged before use.
Temperatures in excess of 50°C (122°F) reduce the performance of
the battery pack. Avoid extended exposure to heat or sunshine (risk
of overheating).
The contacts of chargers and battery packs must be kept clean.
For an optimum life-time, the battery packs have to be fully charged,
after use.
To obtain the longest possible battery life remove the battery pack
from the charger once it is fully charged.
For battery pack storage longer than 30 days:
Store the battery pack where the temperature is below 27°C and
away from moisture
Store the battery packs in a 30% - 50% charged condition
Every six months of storage, charge the pack as normal.
Battery protection for Li-Ion batteries
In extremely high torque, binding, stalling and short circuit situations
that cause high current draw, the tool will vibrate for about 5
seconds, the fuel gauge will flash,and then the tool will turn OFF.
To reset, release the trigger. Under extreme circumstances, the
internal temperature of the battery pack could raise too much. If
this happens, the fuel gauge will flash until the battery pack cooled
down. After the lights go off, the work may continue.
Transporting Lithium Batteries
Lithium-ion batteries are subject to the Dangerous Goods Legislation
requirements.
Transportation of those batteries has to be done in accordance with
local, national and international provisions and regulations.
The user can transport the batteries by road without further
requirements.
Commercial transport of Lithium-Ion batteries by third parties is
subject to Dangerous Goods regulations. Transport preparation and
transport are exclusively to be carried out by appropriately trained
persons and the process has to be accompanied by corresponding
experts.
When transporting batteries:
Ensure that battery contact terminals are protected and insulated to
prevent short circuit.
Ensure that battery pack is secured against movement within
packaging. Do not transport batteries that are cracked or leak.
Check with forwarding company for further advice.
WORKING INSTRUCTIONS
Use only standardized connectors according to national standards
with dedicated crimping dies.
Consult the documents provided by the manufacturer for handling
and assembly instructions for connectors.
Check that the nominal diameter of the connecting item corresponds
to the nominal diameter of the crimping insert.
Before the crimping process begins, the battery capacity must be
checked: minimum 33% (see illustrated description). It may require
charging before work commences.
Actuating the control switch initiates the pressing process, which is
characterized by the crimping dies coming together.
It is the user’s responsibility to check and evaluate that the joint is
correct.
Imperfect joints must be crimped again using a new connector.
Action in the event of faults:
• Keep the reset switch pressed until the jaws have opened
completely
• check the battery capacity
• Inspect the cable and the crimping dies based on the technical
data
• If it is suspected that a live cable has been pressed, the crimping
tool must be inspected at an authorized, specialist workshop
LED indicator
Definition
Solid Green
Tool completed the operation and reached
full crimping pressure.
Solid Red
Tool completed the operation but did NOT
reach full crimping pressure.
Flashing Red
Tool did NOT complete the operation.
Flashing Red/
Green
(after Solid
Green or Solid
Red)
Tool has reached its service interval (40000
crimps). Red/Green flashing will begin
after the solid Red or Green indicator for
the operation is displayed. MILWAUKEE
recommends that the tool be inspected and
preventative maintenance completed. Return
the tool to a MILWAUKEE service facility for
all repairs and maintenance.
ONE-KEY™
To learn more about the ONE-KEY functionality for this tool, please
reference the Quick Start guide included with this product or go to
milwaukeetool.com/ One-Key. To download the ONE-KEY app, visit
the App Store or Google Play from your smart device.
Also, when the product experiences ESD, the Bluetooth
communication will be disconnected. It needs to be reset
manually to recover. We considered the results to be within our
minimum acceptable performance level according to EN 55014-2 /
EN 301 489-1 / EN 301 489-17.
ENGLISH
