background image

6

MAINTENANCE

WARNING

To reduce the risk of injury, always 

unplug the charger and remove the 

battery  pack  from  the  charger  or  tool  before 

performing any maintenance. Never disassemble 

the  tool,  battery  pack  or  charger.  Contact  a 

MILWAUKEE service facility for ALL repairs.

Maintaining Tool 

Keep your tool, battery pack and charger in good 

repair by adopting a regular maintenance program. 

Inspect your tool for issues such as undue noise, 

misalignment or binding of moving parts, breakage of 

parts, or any other condition that may affect the tool 

operation. Return the tool, battery pack, and charger 

to a MILWAUKEE service facility for repair. After six 

months to one year, depending on use, return the 

tool, battery pack and charger to a MILWAUKEE 

service facility for inspection.

If the tool does not start or operate at full power with 

a fully charged battery pack, clean the contacts on 

the battery pack. If the tool still does not work prop

-

erly, return the tool, charger and battery pack, to a 

MILWAUKEE service facility for repairs.

WARNING

To reduce the risk of personal in-

jury and damage, never immerse 

your  tool,  battery  pack  or  charger  in  liquid  or 

allow a liquid to flow inside them.

Cleaning

Clean  dust  and  debris  from  vents.  Keep  handles 

clean, dry and free of oil or grease. Use only mild 

soap and a damp cloth to clean, since certain clean-

ing agents and solvents are harmful to plastics and 

other insulated parts. Some of these include gasoline, 

turpentine, lacquer thinner, paint thinner, chlorinated 

cleaning solvents, ammonia and household deter-

gents containing ammonia. Never use flammable or 

combustible solvents around tools.

Repairs

For repairs, return the tool, battery pack and charger 

to the nearest service center.

ACCESSORIES

WARNING

Use only recommended accesso-

ries. Others may be hazardous.

For a complete listing of accessories, go online to 

www.milwaukeetool.com or contact a distributor.

SERVICE - UNITED STATES

1-800-SAWDUST

 

(1.800.729.3878)

Monday-Friday, 7:00 AM - 6:30 PM CST

or visit 

www.milwaukeetool.com

Contact Corporate After Sales Service Technical 

Support  with  technical,  service/repair,  or  warranty 

questions. 
Email: [email protected]

Become a Heavy Duty Club Member at 

www.milwaukeetool.com  to  receive  important 

notifications regarding your tool purchases. 

SERVICE - CANADA

Milwaukee Tool (Canada) Ltd 

1.800.268.4015

Monday-Friday, 7:00 AM - 4:30 PM CST

or visit 

www.milwaukeetool.ca

LIMITED WARRANTY                     

USA & CANADA

Every MILWAUKEE power tool (including cordless product – tool, 

battery pack(s) - see separate & distinct CORDLESS BATTERY 

PACK LIMITED WARRANTY statements & battery charger and Work 

Lights*) is warranted to the original purchaser only to be free from 

defects in material and workmanship. Subject to certain exceptions, 

MILWAUKEE will repair or replace any part on an electric power tool 

which, after examination, is determined by MILWAUKEE to be defec-

tive in material or workmanship for a period of five (5) years* after the 

date of purchase unless otherwise noted. Return of the power tool 

to a MILWAUKEE factory Service Center location or MILWAUKEE 

Authorized Service Station, freight prepaid and insured, is required. 

A copy of the proof of purchase should be included with the return 

product. This warranty does not apply to damage that MILWAUKEE 

determines to be from repairs made or attempted by anyone other 

than MILWAUKEE authorized personnel, misuse, alterations, abuse, 

normal wear and tear, lack of maintenance, or accidents.

*The warranty period for, Job Site Radios, M12™ Power Port, M18™ 

Power Source, Jobsite Fan and Trade Titan™ Industrial Work Carts 

is one (1) year from the date of purchase. The warranty period for a 

LED Work Light and LED Upgrade Bulb is a limited LIFETIME war-

ranty to the original purchaser only, if during normal use the LED bulb 

fails the Work Light or Upgrade Bulb will be replaced free of charge.

*This warranty does not cover Air Nailers & Stapler, Airless Paint 

Sprayer, Cordless Battery Packs, Gasoline Driven Portable Power 

Generators, Hand Tools, Hoist – Electric, Lever & Hand Chain, M12™ 

Heated Jackets, Reconditioned product and Test & Measurement 

products.  There  are  separate  and  distinct  warranties  available  for 

these products.

Warranty Registration is not necessary to obtain the applicable war-

ranty on a MILWAUKEE power tool product. The manufacturing date 

of the product will be used to determine the warranty period if no proof 

of purchase is provided at the time warranty service is requested.

ACCEPTANCE OF THE EXCLUSIVE REPAIR AND REPLACEMENT 

REMEDIES DESCRIBED HEREIN IS A CONDITION OF THE CON-

TRACT FOR THE PURCHASE OF EVERY MILWAUKEE PRODUCT. 

IF YOU DO NOT AGREE TO THIS CONDITION, YOU SHOULD NOT 

PURCHASE THE PRODUCT. IN NO EVENT SHALL MILWAUKEE BE 

LIABLE FOR ANY INCIDENTAL, SPECIAL, CONSEQUENTIAL OR 

PUNITIVE DAMAGES, OR FOR ANY COSTS, ATTORNEY FEES, 

EXPENSES, LOSSES OR DELAYS ALLEGED TO BE AS A CON-

SEQUENCE OF ANY DAMAGE TO, FAILURE OF, OR DEFECT IN 

ANY PRODUCT INCLUDING, BUT NOT LIMITED TO, ANY CLAIMS 

FOR LOSS OF PROFITS. SOME STATES DO NOT ALLOW THE EX

-

CLUSION OR LIMITATION OF INCIDENTAL OR CONSEQUENTIAL 

DAMAGES, SO THE ABOVE LIMITATION OR EXCLUSION MAY NOT 

APPLY TO YOU. THIS WARRANTY IS EXCLUSIVE AND IN LIEU 

OF ALL OTHER EXPRESS WARRANTIES, WRITTEN OR ORAL. 

TO THE EXTENT PERMITTED BY LAW, MILWAUKEE DISCLAIMS 

ANY IMPLIED WARRANTIES, INCLUDING WITHOUT LIMITATION 

ANY IMPLIED WARRANTY OF MERCHANTABILITY OR FITNESS 

FOR A PARTICULAR USE OR PURPOSE; TO THE EXTENT SUCH 

DISCLAIMER IS NOT PERMITTED BY LAW, SUCH IMPLIED WAR-

RANTIES ARE LIMITED TO THE DURATION OF THE APPLICABLE 

EXPRESS WARRANTY AS DESCRIBED ABOVE. SOME STATES 

DO NOT ALLOW LIMITATIONS ON HOW LONG AN IMPLIED WAR-

RANTY LASTS, SO THE ABOVE LIMITATION MAY NOT APPLY TO 

YOU, THIS WARRANTY GIVES YOU SPECIFIC LEGAL RIGHTS, 

AND YOU MAY ALSO HAVE OTHER RIGHTS WHICH VARY FROM 

STATE TO STATE.

Summary of Contents for 2701-20





















Reviews: