background image

8

9

Maintaining Tool

Keep your tool, battery pack and charger 
in good repair by adopting a regular main-
tenance program. After six months to one 
year, depending on use, return the tool, 
battery pack and charger to a 

MILWAUKEE 

service facility for:
• Lubrication
• 

Brush inspection and replacement

• 

Mechanical inspection and cleaning 
(gears, spindles, bearings, housing, 
etc.)

• 

Electrical inspection (battery pack, 
charger, motor)

• 

Testing to assure proper mechanical and 
electrical operation

If the tool does not start or operate at full 
power with a fully charged battery pack, 
clean the contacts on the battery pack. If 
the tool still does not work properly, return 
the tool, charger and battery pack to a 

MILWAUKEE 

service facility for repairs.

MAINTENANCE

 WARNING

To reduce the risk of personal in-
jury, always unplug the charger and 
remove the battery pack from the 
charger or tool before performing any 
maintenance. Never disassemble the 
tool, battery pack or charger. Contact 
a MILWAUKEE 
service facility for ALL 
repairs.

Cleaning

Clean out dust and debris from vents and 
electrical contacts by blowing with com-
pressed air. Keep tool handles clean, dry and 
free of oil or grease. Use only mild soap and 
a damp cloth to clean the tool, battery pack 
and charger, keeping away from all electri-
cal contacts. Certain cleaning agents and 
solvents are harmful to plastics and other 
insulated parts. Some of these include gaso-
line, turpentine, lacquer thinner, paint thinner, 
chlorinated cleaning solvents, ammonia and 
household detergents containing ammonia. 
Never use fl ammable or combustible sol-
vents around tools. 

Repairs

For repairs, return the tool, battery pack and 
charger to the nearest authorized service 
center.

 WARNING

To reduce the risk of personal in-
jury and damage, never immerse your 
tool, battery pack or charger in liquid 
or allow a liquid to fl ow inside them.

For a complete listing of accessories refer to 
your

 MILWAUKEE 

Electric Tool catalog or go 

on-line to www.milwaukeetool.com. To obtain 
a catalog, contact your local distributor or a 
service center.

 WARNING

Always remove battery pack before 
changing or removing accessories. 
Only use accessories specifically 
recommended for this tool. Others 
may be hazardous.

ACCESSORIES

FIVE YEAR TOOL LIMITED WARRANTY

Every 

MILWAUKEE

 electric power tool (including battery charger) is warranted to the original 

purchaser only to be free from defects in material and workmanship. Subject to certain ex-
ceptions, 

MILWAUKEE

 will repair or replace any part on an electric power tool which, after 

examination, is determined by 

MILWAUKEE

 to be defective in material or workmanship for 

a period of fi ve (5) years* after the date of purchase.  Return the electric power tool and a 
copy of proof of purchase to a 

MILWAUKEE

 factory Service/Sales Support Branch location 

or 

MILWAUKEE

 Authorized Service Station, freight prepaid and insured.  This warranty does 

not apply to damage that 

MILWAUKEE

 determines to be from repairs made or attempted by 

anyone other than 

MILWAUKEE

 authorized personnel, misuse, alterations, abuse, normal 

wear and tear, lack of maintenance, or accidents.

* The warranty period for Hoists (lever, hand chain, & electric chain hoists), Ni-Cd battery 
packs, Work Lights (cordless fl ashlights), Job Site Radios, and Trade Titan™ Industrial Work 
Carts is one (1) year from the date of purchase.

*There is a separate warranty for V™-technology Li-Ion Battery Packs 18 volts or above that 
accompany the power tools:

*Every 

MILWAUKEE

 V™-technology Li-Ion Battery Pack 18 volts or above is covered by an 

initial 1000 Charges/2 Years free replacement warranty.  This means that for the earlier of 
the fi rst 1000 charges or two (2) years from the date of purchase/fi rst charge, a replacement 
battery will be provided to the customer for any defective battery free of charge.  Thereafter, 
customers will also receive an additional warranty on a pro rata basis up to the earlier of the 
fi rst 2000 charges or fi ve (5) Years from the date of purchase/fi rst charge.  This means that 
every customer gets an additional 1000 charges or three (3) years of pro rata warranty on 
the V™-technology Li-Ion Battery Pack 18 volts or above depending upon the amount of use.  
During this additional warranty period, the customer pays for only the useable service received 
over and above the fi rst 1000 Charges/2 years, based on the date of fi rst charge and number 
of charges found on the battery pack via Milwaukee’s V™-technology Service Reader.

Warranty Registration is not necessary to obtain the applicable warranty on a 

MILWAUKEE

 

product.  However, proof of purchase in the form of a sales receipt or other information deemed 
suffi cient by 

MILWAUKEE

 is requested.

ACCEPTANCE OF THE EXCLUSIVE REPAIR AND REPLACEMENT REMEDIES DE-
SCRIBED HEREIN IS A CONDITION OF THE CONTRACT FOR THE PURCHASE OF EVERY 

MILWAUKEE

 PRODUCT.  IF YOU DO NOT AGREE TO THIS CONDITION, YOU SHOULD 

NOT PURCHASE THE PRODUCT.  IN NO EVENT SHALL 

MILWAUKEE

 BE LIABLE FOR 

ANY INCIDENTAL, SPECIAL, CONSEQUENTIAL OR PUNITIVE DAMAGES, OR FOR ANY 
COSTS, ATTORNEY FEES, EXPENSES, LOSSES OR DELAYS ALLEGED TO BE AS A 
CONSEQUENCE OF ANY DAMAGE TO, FAILURE OF, OR DEFECT IN ANY PRODUCT IN-
CLUDING, BUT NOT LIMITED TO, ANY CLAIMS FOR LOSS OF PROFITS.  THIS WARRANTY 
IS EXCLUSIVE AND IN LIEU OF ALL OTHER WARRANTIES OR CONDITIONS, WRITTEN 
OR ORAL, EXPRESSED OR IMPLIED.  WITHOUT LIMITING THE GENERALITY OF THE 
FOREGOING, 

MILWAUKEE

 DISCLAIMS ANY IMPLIED WARRANTY OF MERCHANTABILITY 

OR FITNESS FOR A PARTICULAR USE OR PURPOSE, AND ALL OTHER WARRANTIES.

This warranty applies to product sold in the U.S.A., Canada and Mexico only.

Summary of Contents for 0729-20
















Reviews: