M
AINTENANCE
- 43 -
6-4
H
OW TO
C
LEAN THE
S
CREEN
F
ILTER
The purpose of the Screen Filter is to prevent large particles or other debris from entering the system. If the
Screen Filter becomes blocked with debris, then the Feedwater will not flow freely to the system.
It is recommended to clean the Screen Filter twice a year or whenever it may have become clogged.
Close the Feedwater Supply Valve.
Open the front cover to let the system go into
STANDBY mode.
Locate the Screen Filter. This will be located
where the Feedwater 8 mm OD Tubing
originates.
Unscrew the collar that holds the Feedwater
Tubing to the barbed end of the fittings (A). Pull
the tubing off of the fitting.
Unscrew the Screen Filter from the Feedwater
pipe.
Go to a sink and flush tap water backwards
through the Screen Filter. The water should flow
through the barbed end first. Any trapped debris
on the Screen Filter will be flushed out (B).
Apply 3-4 turns of new white tape to the threads
of the Feedwater Pipe in a clockwise direction.
Screw the Screen Filter back onto the Feedwater
Supply Pipe.
Attach the Feedwater Tubing back onto the
Barbed Fitting (C).
Open the Feedwater Supply Valve.
Close the front cover.
Leave the system in PRE OPERATE mode.
A
B
C
Summary of Contents for DIRECT-Q 3 SYSTEM
Page 1: ...User Manual DIRECT Q 3 SYSTEM DIRECT Q 3 UV SYSTEM...
Page 58: ...MAINTENANCE 50 G H...
Page 60: ...MAINTENANCE 52 M...
Page 63: ...MAINTENANCE 55 G H...
