Millipore DIRECT-Q 3 SYSTEM, User Manual

Page: 38 / 73

U
SING THE
D
IRECT
-Q
- 30 -
5-3 O
PERATING
M
ODES
S
TANDBY
STANDBY mode is displayed when the front cover
is removed. The system will depressurize during
which STANDBY will be blinking on the Display
for 10 seconds. All system operations are disabled.
STANDBY mode is selected before attempting
maintenance on the system.
F
LUSH
FLU (FLUSH) mode is displayed for 15 minutes
after a new SmartPak has been installed and the
front cover has been closed. FLUSH mode allows
tap water to enter and rinse the new SmartPak. The
Tank Outlet Valve must be opened during the
FLUSH cycle to keep the tank from filling until the
SmartPak is rinsed.
FLUSH mode is stopped if the front cover is
removed to go into STANDBY mode. When the
front cover is closed, FLUSH mode resumes from
the last remaining time on the Display.
If the system is powered OFF during FLUSH mode
and powered back ON, then a new FLUSH cycle
will start.
The system will have a 2 minute FAST FLUSH
cycle every 24 hours of PRE OPERATE mode.