Miller Robotic Interface II, Owner'S Manual

Page: 14 / 78

OM-172 324 Page 8
WARNING
BUILDUP OF SHIELDING GAS can harm health or kill.
•
Shut off shielding gas supply when not in use.
warn1.1 9/91
1 Shielding Gas Cylinder
2 Valve
Open valve on cylinder just before
welding.
Close valve on cylinder when fin-
ished welding.
sb5.1* 6/92 – S-0621-C
1
2
Figure 4-4. Shielding Gas
Install & Connect
Interface Into
Welding System
Put On
Personal Safety
Equipment
Set All Controls
And Verify
Program Selection
Turn On Shielding
Gas
Turn On
Welding System
Equipment
Adjust Weld
Parameters
ssb6.1* 9/92
Perform Test
Weld
Begin
Welding
As Needed
Figure 4-5. Sequence Of Gas Metal Arc (GMAW), Gas Metal Arc - Pulse (GMAW-P),
And Flux Cored Arc Welding (FCAW)
Ref. ST-150 171-C / Ref. SC-154 197
Set switches as shown for all
welding processes when using
this interface unit.
Figure 4-6. Setting Switches On 450 Ampere Inverter Model Welding Power Source