eGROSS pro-x
– eGROSS
MM137-004 - Operator Manual
13
1.5. Transport and storage conditions
Temperature: -20°C up to +60°C (-4°F up to 140°F)
Humidity: up to 80% (up to 50% at 40°C (104°F)) non-condensing
1.6. Antivirus
Only for the eGROSS pro-x model.
Milestone suggests to install an antivirus software. Milestone does not install antivirus software so that you
can choose your preferred version, according to your needs. Pay attention when setting the Antivirus so that
data flow on the USB protocols and accesses to the Hard Disk are not limited.
1.7. Warning information
PERSONAL DATA SAFETY
The Device described herein is not intended for managing personal data of natural persons. Personal data of
natural persons shall not be inserted into the Device during the use of the Device. The organization that uses
the Device shall implement appropriate measures to ensure that no personal data of natural persons are
inserted into the Device. All the data referred to a person and inserted into the device shall use, at least, the
“pseudonymization”, in such a manner that the personal data can no longer be attributed to a specific data
subject without the use of additional information, provided that such additional information is kept separately
and is subject to technical and organizational measures to ensure that the personal data are not attributed to
an identified or identifiable natural person.
Equipment shall be connected to main sockets outlets which is accessible and visible by the operator.
All equipment parts and all optional parts shall be supplied only by the manufacturer.
The unit is equipped with replaceable fuses.
If the system is still not properly working, please contact your local representative or the manufacturer (always
provide the serial number of the unit, see label on the left of the unit).
In case of removal of equipment for repair:
1. Shut down the PC.
2. Switch the unit OFF.
3. Disconnect the main plug of unit from the main socket outlets.
4. Disconnect all optional parts, if present (keyboard, barcode reader).
5. Clean and disinfect all parts of the unit according to chapter 4.2.
6. Put all parts of the equipment into the package supplied by the manufacturer (original package).
7. Send device to the manufacturer for repair.
1.8. Backing up the MacroPATH data (only for eGROSS pro-x)
The size of images with the recommended settings is 1.5MB/image (please refer to chapter 3).
Use of the equipment in ways other than those specified may void the warranty provided by
the manufacturer.
Do not open the camera box. Infringement voids the warranty.
Milestone strongly recommends saving all the cases and the relative images on a server or
other kind of support using an automated backup procedure.
Contact your local Network/IT Manager.
