eGROSS pro-x
– eGROSS
MM137-004 - Operator Manual
59
There are 2 feet on the bottom of the cutting board, which must be inserted into the holes on the work surface
in order to hold it in place.
Work surface and the cutting board are perforated in order to allow air flow pass through.
Under the work surface there is a washing compartment and a net to retrieve any samples, as shown in the
figure below (the surface is turned over to show the net).
Insert your fingers into the 2 holes and lift the surface to access the compartment.
-
the screen above the working surface and screen above the sink have been fully
extracted,
-
the fume filter is connected to the unit (CODE 102915),
-
the Ventilation system connected to the unit compensates for the 550Pa pressure drop
of the filter,
-
the ventilation is set to the highest value,
-
there is a 3-metre pipe (supplied with the unit) installed between the unit and the fume
filter (CODE 102915).
Removable
biopsy
saving net
Vented surface
