36
ORTHORA 200
Instruction Manual
7.18 Suspended table
General Information
The suspended table (optionally with instrument rack) offers space for
2 standard trays. The dimensions of the chrome steel surface are 375
x 295 mm (WxD)
Description
This construction with adaptable suspended table is mounted at the
treatment unit and can be swiveled by 135°. The suspended table itself
has a swivel range of 100° and its height can be adjusted by a spring
mounted arm. If there is media supply on the suspended table, it is fed
and controlled from the treatment unit.
Commissioning and use
The loading capacity of the suspended table depends on the pre-
stressed spring package and the instrument rack mounted. Maximal
loading capacity of the suspended table must not exceed 2.7 kg. A
break (A) keeps the suspended table in position. Only use products
in perfect operating condition. Immediately stop any work if intermit-
tences or other signs of product failure occur.
Cleaning the surface board
The surface board can be lifted upwards and removed from the sup-
port plate.
The chrome steel surface board is easy to clean. For cleaning use
warm water with a non-abrasive household cleaner or a cleaning so-
lution. Rinse it with clean, lukewarm water and dry it with a soft cloth.
Remove scratches with a soft steel wool or Scotch (Scotch-Brite Hand
Pad Nr. 7447), rubbing in direction of the surface’s grain.
Disinfection
Use a moist cloth and disinfect the surface with a standard disinfectant
(e.g. Dürr Surface Disinfection FD 322 / FD 350).
Maintenance
No specific maintenance procedures are intended for the suspended
table. Any repairs such as making adjustments or changing settings
are only to be carried out by qualified technicians or Mikrona’s custo-
mer service.
A
7.19 Instrument tray
General information
The dimensions of the instrument tray’s chrome steel surface are
191 x 284 mm (WxD)
Description
This construction with the adaptable instrument tray has a rotating
range of 120°. The suspended table itself has a swivel range of 240°.
If there is media supply on the instrument tray, it is fed and controlled
from the treatment unit. If water supply is required for any instruments,
these must be approved by the DVGW or a separation system must be
installed.
Commissioning and use
The maximal loading capacity of the suspended table must not exceed
5.0 kg. Only use products in perfect operating condition. Immediately
stop any work if intermittences or other signs of product failure occur.
Cleaning the surface board
The surface board can be lifted upwards and removed from the sup-
port plate.
The chrome steel surface board is easy to clean. For cleaning use
warm water with a non-abrasive household cleaner or a cleaning so-
lution. Rinse it with clean, lukewarm water and dry it with a soft cloth.