33
Instruction Manual
7.17.1 Built-in model
General information
For information on technical features as well as on operation and ap-
plication of this examination lamp please consider the specific instruc-
tion and maintenance manual which comes with the lamp.
Description
The built-in Mikrona examination lamp is activated by an On/Off switch
integrated into lamp head or by a sensor. The lamp head can be rota-
ted by 300° and its height is adjustable by a spring mounted arm. The
lamp is fed from the treatment unit. Optionally, the lamp with switch
can also be activated by a 3-function pedal at the treatment unit (see
7.2.2 Special functions).
Commissioning and use
Only use instruments in perfect operating condition. Immediately stop
any work if intermittences or other signs of product failure occur.
Cleaning
Do not clean the protective cover while the lamp is activated and let
the halogen lamp and the reflector cool down sufficiently before remo-
ving the protective cover.
Unscrew the central attachment bolts of the protective cover (counter-
clockwise) and remove the protective cover.
The protective cover is made of acrylic glass and easy to clean. Clean
stained surfaces by using warm water with a non-abrasive household
cleaner and a soft tissue or cloth (cotton). Avoid under any circum-
stances to use a dry or dirty cloth as this may lead to scratches on
the acrylic glass. Never use solvent-containing products or cleaning
agents (e.g. benzene, alcohol etc.). These agents can damage and
cloud the surface.
Possible scratches can be removed using Acrylic glass polish.
Disinfection
Use a moist cloth to disinfect the case surface.
Do not spray any disinfectant solution on the device.
Do not insert the device into an ultrasonic bath.
Maintenance
No specific maintenance procedures are intended for this devise.
Under any circumstances avoid using any lubricants as this my cause
irreparable damage to examination lamp.