15
Instruction Manual
Instrument operation 4-F DYN
Micromotor, turbine and ultrasonic devices are controlled by the
4-function pedal DYN and shown on the display A.
10
Speed level down or intensity level down
11
Speed level up or intensity level up
12
Device on (dynamic), selectable basic settings per level in
mode IS
13 1 x click
Activation of spray or chip blower (airspray)
Display (G) LED on: Spray is activated
Display (G) LED blinking: Chip blower is active
2 x click
Back and forth switching between spray and chip blower
13 1 x click
Deactivation of spray or chip blower
(last setting is saved by the device)
Display (G) LED is off / no blinking
1 x click
Activation of the last used setting
(spray of chip blower)
When the instrument is deactivated (switch on instrument rack) the
last setting is saved. By taking the instrument from the rack the last
setting is activated again. Display (G) LED is on, is blinking or off.
13
Micromotor changes direction of rotation when pressing button for
more than 1.5 seconds.
The basic settings can be programmed under the instruments data IN (7.2.6).
Stand-alone 1-function pedal DYN (dynamic)
Micromotor, turbine and ultrasonic devices are optionally controlled by
the stand-alone 1-function pedal DYN and shown on the display.
The stand-alone 1-function pedal DYN can only be used in parallel
connection with the built-in 4-function pedal DYN.
Instrument operation
1
Device on (dynamic), selectable basic settings per level in
mode IS
Speed/intensity of instruments is adjusted by the built-in 4-function
pedal DYN.
Stand-alone 4-function pedal DYN (dynamic)
Micromotor, turbine and ultrasonic devices are optionally controlled by
the stand-alone 4-function pedal DYN and shown on the display.
The stand-alone 1-function pedal DYN can be used autonomous or in
parallel connection with the built-in 4-function pedal DYN.
Instrument operation
1
Speed level down or intensity down
2
Speed level up or intensity up
3
Device on (dynamic), selectable basic settings per level in
mode IS
4
Spray on/off (
1 x click
)
detailed information see above
4
Chip blower on/of (
2 x click
)
detailed information see above
Water supply spray suppressed
4
Micromotor changes direction of rotation when pressing button for
more than 1.5 seconds.
The basic settings can be programmed under the instruments data IN (7.2.6).
2
4
1
3
7.2.3 Operation 4-function pedal DYN (dynamic)
With the operation over the 4-function pedal DYN the speed/intensity
is emitted dynamically within the 4 selectable levels. The setting of the
speed/intensity within the levels is adjusted in the programming mode
(ST09).
1
Display functions
Active instruments and their functions are shown on the display.
B Display of special functions
C Ultrasonic device
D Turbine (T)
E Micromotor (M)
F Speed level
Speed and intensity can be selected from 4 levels.
Each level per instrument can be adjusted by a service technician
to the individual needs of the user.
Direction of rotation of micromotor:
Clockwise rotation LED shines
Counter-clockwise rotation LED blinks
G Spray on (C) or , LED shines
Chip blower (C) or , LED blinks