28
ORTHORA 200
Instruction Manual
7.13 6-function syringe Luzzani
General information
For information on technical features as well as on operation and ap-
plication of this syringe please consider the specific instruction manual
which comes with the instrument. Please handle the hand piece as
specified in the maintenance instructions of the specific manufacturer.
Description
This syringe has been design exclusively for dental application. It
serves to inject air and water, separated or as spray with connectable
heating.
Commissioning and use
Only use instruments in perfect operating condition. Immediately stop
any work if signs of instrument failure occur.
Injecting water: press left button on the handhold.
Injecting air: press right button on the handhold.
Injecting water-air-mixture (spray): simultaneously press both buttons
on the handhold.
Injecting warm water: Turn the switch on the bottom of the handhold
to the right. When the green LED diode shines, press the left button on
the handhold.
Injecting warm air: Turn the switch on the bottom of the handhold to
the right. When the green LED diode shines, press the right button on
the handhold.
Injecting warm water-air-mixture (spray): Turn the switch on the bottom
of the handhold to the right. When the green LED diode shines, simul-
taneously press both buttons on the handhold.
Cleaning and sterilizing
Clean and sterilize the case jacket and the cannula before using it on
the next patient. Remove the cannula by loosening the screw sleeve
and/or remove the entire case by pressing the button at the bottom of
the handhold and pulling it off.
Sterilization occurs in an autoclave at 134°C.
Disinfection
For disinfection use a clean damp cloth and disinfect the case surface.
Only use disinfectants recommended by the manufacturer.
Never submerge the device in a disinfectant solution.
Do not insert the device into an ultrasonic bath.
Maintenance
No specific maintenance procedures are intended for this devise.
Under any circumstances avoid using any lubricants as this my cause
irreparable damage to syringe.
Default settings
Air
3 bar (10-12 l/min)
Water
ca. 80 ml/min