20
21
(4) – Anybus module
Setup menu
Anybus Mod. Ã
(not present)
No Anybus module is installed or detected.
DeviceNet
-DeviceNet-----Ã
¾ Device address
DeviceNet address setup
Press Enter
Press Down or Up
Set the network device address.
N is in the range 0 to 255.
Press Enter to leave Device address
Æ Device address
N
RIGHT
DOWN
ENTER
LEFT
UP
RIGHT
DOWN
ENTER
LEFT
UP
RIGHT
DOWN
ENTER
LEFT
UP
The interface automatically
detects and identifies the
installed Anybus module
and consequently displays
different scenarios,
depending on the
information needed by the
Anybus module.
DeviceNet baud rate setup
Press Enter
Press Down or Up
Set the network baud rate.
Possible settings.
125 - 250 - 500kbps and Autobaud
Press Enter to leave
Æ Baud rate
125kbps
RIGHT
DOWN
ENTER
LEFT
UP
RIGHT
DOWN
ENTER
LEFT
UP
RIGHT
DOWN
ENTER
LEFT
UP
-DeviceNet-----Ã
À Baud rate
The EDS file
needed by the
robot controller/PLC
can be found on the
SD card, or
downloaded from
www.migatronic.com
MY MIGATRONIC
