Miele WMV 960 WPS Operating Instructions Manual Download Page 64

Page: 64 / 120

Favourite programmes

You can save your own customised
wash programmes under names of your
choice.

The saved favourite programmes will be
sorted alphabetically.

To create a favourite pro-
gramme

There are two ways of creating a fa-
vourite programme.

Option 1



With the main menu showing in the
display, touch the

Favourite pro-

grammes

sensor.

The display will change to show the Fa-
vourites menu

Favourite programmes



Touch the

Create

sensor.

The

Create

sensor will not appear if the

maximum number of 10 favourite pro-
grammes has already been reached.

The display will change to show the

Se-

lect a programme

menu.



Select the programme you want.

The display will guide you automatically
through all the further programme set-
tings.

A summary of the selected parameters
will then appear in the display.

Tip:

If a parameter is not correct it can

be changed. Touch the



sensor re-

peatedly until the programme setting
you want appears in the display and
then change it.

When all the parameters are correct:



Select

Option 2

You can save a programme which has
been selected and started as a Favour-
ite programme.



After the programme has started suc-
cessfully, touch the

Save

sensor.



Enter a name.

Summary of Contents for WMV 960 WPS

























































































































Search results

Summary of Contents for WMV 960 WPS

Reviews:

Related manuals for WMV 960 WPS

Brands by name

Popular brands

Miele WMV 960 WPS, Operating Instructions Manual

Search results

Summary of Contents for WMV 960 WPS

Reviews:

Related manuals for WMV 960 WPS

Brands by name

Popular brands