Miele WMV 960 WPS Operating Instructions Manual Download Page 15

Page: 15 / 120

Operating the washing machine

Touch display and sensors

The





and

Start/Stop

sensors and

the sensors in the display react to finger
tip contact.

The display can be scratched by
pointed or sharp objects, e.g. pens.
Only touch the touch display with
your finger tips.

Touching the sensors in the display re-
veals a list of options or a sub-menu
and also takes you to another menu.

In some instances, if you do not touch
one of the sensors for several seconds,
the display will revert to the previous
menu. You may then need to enter the
settings again.

Main menu

After switching on the washing machine
the main menu will appear in the dis-
play.

You access all the important sub-
menus from the main menu.

You can return to the main menu at
any time by touching the



sensor.

Values set previously are not saved.

10:30



Programmes

Favourite programmes

Washing assistent

＜

＞



Programmes

For selecting the wash programme.



Favourite programmes

You can save up to ten of your own
customised wash programmes.

See "Favourite programmes" for more
information.

Summary of Contents for WMV 960 WPS

























































































































Search results

Summary of Contents for WMV 960 WPS

Reviews:

Related manuals for WMV 960 WPS

Brands by name

Popular brands

Miele WMV 960 WPS, Operating Instructions Manual

Search results

Summary of Contents for WMV 960 WPS

Reviews:

Related manuals for WMV 960 WPS

Brands by name

Popular brands