Changing the programme sequence
56
Adding or removing laundry
after the programme has star-
ted
You can add or remove items during the
first few minutes after the programme
has started.
Touch the
Start/Stop
sensor.
The following will appear in the display:
Selection
Cancel
programme
Add laundry
Activate safety
lock
Touch the
Add laundry
sensor.
The programme will stop and the door
will unlock.
Pull open the door.
Add laundry or remove individual
items.
Close the door.
Touch the
Start/Stop
sensor.
The programme will continue.
Please note the following:
Once a programme has started suc-
cessfully the washing machine cannot
recognise any adjustment to the load.
For this reason, if laundry is added or
removed after the start of a programme,
the machine will always complete the
programme cycle assuming a full load.
The door cannot be opened, if:
– the suds temperature is above
55°C
.
– the water is above a certain level.
– the programme has reached the
Spin
stage.
If you want to open the door when the
above conditions are present you will
need to cancel the programme.
The safety lock will remain activated if
the temperature in the drum is above
55°C. The lock will not deactivate until
the temperature has dropped to below
55°C.
