Miele WMV 960 WPS Operating Instructions Manual Download Page 34

Page: 34 / 120

3. Select programme settings

ProgrammeManager

The ProgrammeManager option can
be used to customise the washing
programmes to suit your requirements.



Touch the

Prog. Manager

sensor.



Select the option you want.

ProgrammeManager is switched on.

See "ProgrammeManager" for more in-
formation.

Options

You can use the extra options to aug-
ment the wash programmes.



Touch the

Extras

sensor.



Select one or several options.



Confirm with the

sensor.

The option is selected.

See "Options" for further information.

Stains

In order to clean stained laundry more
effectively you can choose from a list
of various types of stains. The wash
programme will then adapt to the
types of stains selected.



Touch the

Stains

sensor.



Select the type of stains from the list.

You can select a maximum of three
types of stain per wash cycle.

With some stains, helpful information
will also appear in the display when
they are selected.



Confirm the information with



Confirm selection of the stains with
the

sensor.

More information may appear in the
display which must be confirmed with

The selection is saved.

Switching on delay start

You can use delay start to set the fin-
ish time or the start time for a wash
programme.



Touch the

Finish at

sensor.



Use the

–

and

sensors to set the

time you want and confirm with the

sensor.

The delay start time is saved. See
"Delay start" for more information.

Summary of Contents for WMV 960 WPS

























































































































Search results

Summary of Contents for WMV 960 WPS

Reviews:

Related manuals for WMV 960 WPS

Brands by name

Popular brands

Miele WMV 960 WPS, Operating Instructions Manual

Search results

Summary of Contents for WMV 960 WPS

Reviews:

Related manuals for WMV 960 WPS

Brands by name

Popular brands