Miele WMV 960 WPS Operating Instructions Manual Download Page 42

Page: 42 / 120

Degree of soiling

If you have selected automatic dispens-
ing or loaded the washing machine, the
display will then prompt you to enter the
degree of soiling.

Degree of soiling



Normal

Heavy

Light

You can set the degree of soiling with
the

Light

Heavy

sensor. Your selection

is confirmed with the

sensor.

Lightly soiled
No visible dirt or stains. Possibly slight
body odour.

Normally soiled
Visibly dirty and/or just a few slight
stains.

Heavily soiled
Soiling and/or stains clearly visible.

The following parameters will change
depending on the degree of soiling se-
lected:

– detergent dosage

– rinse water level

– programme duration (with light soiling

the programme duration will be
shorter)

The degree of soiling cannot be selec-
ted for some programmes. These pro-
grammes are designed for normally
soiled laundry.

Tip:

You can alter the default setting for

the degree of soiling or switch off the
degree of soiling query in Settings (see
"Settings - Degree of soiling").

Summary of Contents for WMV 960 WPS

























































































































Search results

Summary of Contents for WMV 960 WPS

Reviews:

Related manuals for WMV 960 WPS

Brands by name

Popular brands

Miele WMV 960 WPS, Operating Instructions Manual

Search results

Summary of Contents for WMV 960 WPS

Reviews:

Related manuals for WMV 960 WPS

Brands by name

Popular brands