background image

Pressure Washer Owner’s Manual  

This Manual Contains Important Safety Instructions and Operating Instructions 

Models: P1450S, P1750S, P1450S-CAN, P1750S-CAN 

Contents: 

Page 2     Factory Original Parts 
Page 3     

Package Contents/Component Identification 

Page 5     Warnings 
Page 7     Preparation & Assembly - Model 1450S, 1450S-CAN 
Page 8     Preparation & Assembly - Model 1750S, 1750S-CAN 
Page 9     Operation 
Page 13     Maintenance 
Page 14     Tips for Cleaning 
Page 15     Troubleshooting 
Page 16      Warranty 
 
 

QUESTIONS OR NEED HELP? 

Call: 919-550-3259 

www.PressureWasher911.com

 

DO NOT RETURN THIS PRESSURE 

WASHER TO THE STORE! 

Have the following information ready when you call us: 
Date of Purchase: _____________________________ 
Location of Purchase:  __________________________ 
Serial #: ____________________________________ 

IMPORTANT SAFETY INSTRUCTIONS: 

READ SAFETY WARNINGS AND OPERATING INSTRUCTIONS CAREFULLY 

SAVE THESE INSTRUCTIONS 

Is a registered trademark of The Stanley Works or its affiliates and is 
used under license by GXi Outdoor Power, LLC, 7868 Highway 70 
Business, Clayton, NC USA  27520. 

Summary of Contents for P1450S

















Reviews: