background image

Settings

111

Memory

The washing machine will save the
settings (temperature, spin speed and
some of the options) which have been
selected for a programme after the
programme has started.

When this programme is chosen again,
these saved settings will appear in the
display.

Factory default setting: the Memory
function is switched off.

Longer pre-wash Cottons

If you require a longer pre-wash you
can extend the Cottons programme's
standard pre-wash time of 25 minutes

Options

– No increase (Factory default setting)

25 minute pre-wash

– +6 min

31 minute pre-wash

– +9 min

34 minute pre-wash

– +12 min

37 minute pre-wash

Soak duration

You can set a duration for the soak
process of between 30 minutes and 5
hours.

You can select the duration in 30 minute
increments. When the 

Soak

 option is

selected the laundry will be soaked for
the duration selected.

Gentle action

Activating gentle action reduces the
drum action and is suitable for wash-
ing slightly soiled items more gently.

Gentle action can be activated for the

Cottons

 and 

Minimum iron

 pro-

grammes.

Factory default setting: Gentle action is
switched off.

Reduce temp.

The boiling point for water is lower at
altitudes of more than 1000 m above
sea level. In order to avoid water boil-
ing, the maximum temperature is re-
duced to 80°C even when a higher
temperature is selected.

Factory default setting: the reduce tem-
perature setting is switched off.

Summary of Contents for WMV 960 WPS

























































































































Reviews: