Miele WMV 960 WPS Operating Instructions Manual Download Page 73

Page: 73 / 120

Detergent

Fabric conditioner and liquid
starch at the end of the pro-
gramme

You can dispense fabric conditioner
either by using automatic dispensing or
via the detergent dispenser compart-
ment.

Automatic dispensing

One of the automatic dispensing con-
tainers must be filled with fabric condi-
tioner.



Select the programme required.



Select

TwinDos



Select the degree of soiling level of
the load.

The display will change to show the

Se-

lect agent

menu.



Make sure that

Fabric conditioner

marked and confirm selection with
the

sensor.

Fabric conditioner will be dispensed in
the last rinse.

Manual dispensing



Add the fabric conditioner or liquid
starch to the



compartment or in-

sert the appropriate capsule.

Do not

exceed the maximum level mark.

The agent will be automatically dis-
pensed in the last rinse. At the end of
the programme a small amount of water
will remain in the



compartment.

If starching frequently, thoroughly
clean the dispenser compartment,
especially the siphon tube regularly.

Summary of Contents for WMV 960 WPS

























































































































Search results

Summary of Contents for WMV 960 WPS

Reviews:

Related manuals for WMV 960 WPS

Brands by name

Popular brands

Miele WMV 960 WPS, Operating Instructions Manual

Search results

Summary of Contents for WMV 960 WPS

Reviews:

Related manuals for WMV 960 WPS

Brands by name

Popular brands