Spinning
45
To omit the final spin (Rinse
hold)
Select the
Rinse hold
option. The laun-
dry is not spun after the final rinse
and remains in the final rinse water.
This helps prevent creasing if the
laundry is not going to be removed
from the drum immediately after the
end of the programme.
To start the final spin:
Touch the
Change
sensor.
Select
Spin speed
and set the spin
speed you want.
Start the final spin with the
Start/Stop
sensor.
To end the programme:
Touch the
Change
sensor.
Select
Spin speed
and set the spin
speed to
0 rpm
(no spin).
Touch the
Start/Stop
sensor.
The water will drain away.
To omit rinse and interim spin
and the final spin
Touch the
Spin speed
sensor.
Select the
0
rpm
setting.
After the last rinse, the water will be
pumped away and the anti-crease
phase will switch in.
In some programmes an additional rinse
is introduced with this setting.
