Miele KWT 6833 SG, Operating And Installation Instructions

Page: 34 / 72

Storing wine bottles
34
Wooden shelves
The wooden shelves are on telescopic
runners which can be pulled out to
make it easier to store and remove
bottles. There are two wooden shelves
on runners in the middle and lower
zones (the second and third shelf from
the top in each zone) which can be
pulled right out. The remaining wooden
shelves can be partially pulled out.
Please note that the uppermost
runners in each of the three zones are
only suitable for shallow wooden
shelves.
Moving the wooden shelves
The wooden shelves can be removed
and replaced again if required.

Pull the wooden shelf out until it
stops, then lift it up and off the
runners. Hold onto the frame to do
this.

If you require more room (e.g. to set
up the bottle presenter), cover the top
runners which are not now needed on
both sides with the covers supplied.
The thicker side of the cover should
point forwards. The covers are held in
position with magnets.

To replace the shelf, click it into place
on the extended runners. The
magnetic strip should be pointing
forwards.