Miele KWT 6833 SG Operating And Installation Instructions Download | Manualshive

Page: 10 / 72

background image

Warning and Safety instructions

10



This wine conditioning unit must not be used in a non-stationary

location (e.g. on a ship).



Do not use a damaged wine conditioning unit. It could be

dangerous. Check the wine conditioning unit for visible signs of
damage.



The wine conditioning unit must be isolated from the electricity

supply during installation, maintenance and repair work.



While the wine conditioning unit is under warranty, repairs should

only be undertaken by a Miele authorised technician. Otherwise the
warranty is invalidated.



Faulty components must only be replaced with genuine Miele

original spare parts. Miele can only guarantee the safety standards of
the appliance when Miele replacement parts are used.



This wine conditioning unit is supplied with a special lamp to cope

with particular conditions (e.g. temperature, moisture, chemical
resistance, abrasion resistance and vibration). This lamp must only
be used for the purpose for which it is intended. The lamp is not
suitable for room lighting. Replacement lamps may only be fitted by
a Miele authorised technician or by the Miele Customer Service
Department. This wine conditioning unit contains several light
sources with at least energy efficiency class E.

«
...
8
9
10
11
12
...
»

Summary of Contents for KWT 6833 SG









































































Reviews:

No comments

Related manuals for KWT 6833 SG

Brand: GE Pages: 16

42525 Multi-cook

Brand: Gastroback Pages: 30

Brand: Commercial CHEF Pages: 24

Brand: Sunbeam Pages: 11

Brand: Omcan Pages: 16

Elan 90 Dual Fuel

Brand: Rangemaster Pages: 40

TURBOWAVEbio TT-FD9

Brand: TurboTronic Pages: 36

Brand: EuropAce Pages: 18

Brand: Amica Pages: 74

Brand: Maestro Pages: 70

Brand: Waring Pages: 4

Brand: Qi Aerista Pages: 20

Bistro BECP0020

Brand: Wolfgang Puck Pages: 18

Brand: Skyfood Pages: 12

Brand: OZtrail Pages: 2

TurboVapor 1950X

Brand: EFFEKTIV Pages: 16

Brand: Jenn-Air Pages: 40

Brand: Orava Pages: 19

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands