Miele KWT 6833 SG Operating And Installation Instructions Download | Manualshive

Page: 46 / 72

background image

Problem solving guide

46

The interior lighting is not working.

Issue

Cause and remedy

The LED interior lighting
is not working.

The wine conditioning unit is not switched on.



Switch the wine conditioning unit on.

To avoid overheating, the LED lighting switches itself
off automatically after approx. 15 minutes if the door
is left open.
If this is not the cause, then there is a fault.



Danger of electric shock.

There are live electrical components under the
lighting cover.
The LED lighting may only be repaired or replaced
by the Customer Service Department.



Risk of injury from LED lighting.

This lighting corresponds to risk group RG 2. If the
cover is defective, there is a danger of eye injury.
If the lighting cover is defective, do not look from a
close range directly into the lighting with optical
instruments (e.g. magnifying glass or similar).



Call the Customer Service Department.

The LED interior lighting
is on even when the
door is closed.

The feature lighting is switched on.



Switch the feature lighting off (see “Feature
lighting”).

«
...
44
45
46
47
48
...
»

Summary of Contents for KWT 6833 SG









































































Reviews:

No comments

Related manuals for KWT 6833 SG

Brand: Hamilton Beach Pages: 30

Brand: Hamilton Beach Pages: 28

Brand: Hamilton Beach Pages: 9

Brand: Lakeland Pages: 16

Brand: Lakeland Pages: 43

Brand: Lakeland Pages: 16

Brand: Lakeland Pages: 18

Brand: Lakeland Pages: 12

Brand: .Too Pages: 10

Brand: Finlux Pages: 11

Brand: Indesit Pages: 20

Brand: Zeegma Pages: 56

Brand: Linea 2000 Pages: 52

Brand: REBER Pages: 13

Brand: Kalorik Pages: 30

Brand: Back to Basics Pages: 8

Brand: Anvil Pages: 1

Brand: Bizerba Pages: 92

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands