Miele KWT 6833 SG Operating And Installation Instructions Download | Manualshive

Page: 9 / 72

background image

Warning and Safety instructions

9



To avoid the risk of damage to the wine conditioning unit, make

sure that the connection data (fuse rating, frequency and voltage) on
the data plate corresponds to the household supply.
Check that this is the case before connecting the wine conditioning
unit. Consult a qualified electrician if in any doubt.



The electrical safety of the wine conditioning unit can only be

guaranteed when correctly earthed. It is essential that this standard
safety requirement is met. If in any doubt please have the electrical
installation tested by a qualified electrician.



Reliable and safe operation of the wine conditioning unit can only

be assured if it has been connected to the mains electricity supply.



If the electrical connection cable is faulty it must only be replaced

by a Miele authorised service technician to protect the user from
danger.



Do not connect the wine conditioning unit to the mains electrical

supply by a multi-socket adapter or extension lead. These are a fire
hazard and do not guarantee the required safety of the appliance.



If moisture gets into electrical components, it could cause a short

circuit. Therefore, do not operate this wine conditioning unit in areas
which are exposed to moisture (e.g in a garage or utility room).

«
...
7
8
9
10
11
...
»

Summary of Contents for KWT 6833 SG









































































Reviews:

No comments

Related manuals for KWT 6833 SG

Profile TRATTORIA PS96PZRSS

Brand: GE Pages: 12

Brand: Oster Pages: 12

Brand: Westinghouse Pages: 26

the Scraper Mixer Pro BEM800UK

Brand: Sage Pages: 26

Brand: La Sommeliere Pages: 57

Brand: KING Pages: 33

Brand: Bravetti Pages: 13

Brand: Adler Pages: 56

Your Creations 23480

Brand: Russell Hobbs Pages: 12

Brand: Stilevs Pages: 16

Brand: LeCavist Pages: 34

Brand: Cook's essentials Pages: 19

Brand: Scarlett Pages: 20

MONDOVINO MVP46DS

Brand: AVG Pages: 26

Brand: Crofton Pages: 16

Brand: HURAKAN Pages: 67

Brand: eta Pages: 44

AG202MG - Gas Burner Module

Brand: Maytag Pages: 1

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands