Miele KWT 6833 SG Operating And Installation Instructions Download

Page: 41 / 72

Active AirClean filters

Fresh air from the room enters the wine
conditioning unit through the Active
AirClean filters. Filtering the incoming
air through the Active AirClean filters
ensures that all the air entering the
appliance is fresh and free from dust
and odours.

The reminder to change the Active
AirClean filters will appear every 12
months at the latest.

When the Change Active AirClean filter
symbol



lights up in the display, the

Active AirClean filters in all three wine
conditioning zones need to be
changed.

Replacing the Active AirClean
filters



Turn the filter 90° clockwise or anti-
clockwise.



Pull the filter out.



Insert a new filter with the handle in
the vertical position.



Turn the filter 90 °C clockwise or anti-
clockwise until it clicks into place.

Active AirClean filters can be obtained
from your Miele dealer, Miele or via the
internet.

To confirm the filters have been
changed



Touch the settings sensor.

All symbols available for selection will
appear in the display and the



symbol

flashes.



Touch the sensors for setting the
temperature (





) repeatedly until

the



symbol flashes.



Touch the OK sensor to confirm your
selection.

The



will flash in the display (means:

Active AirClean filter is fitted in the
appliance), the



symbol lights up.



Touch the symbols for setting the
temperature (





) repeatedly, until

the



symbol is displayed (means: the

counter has been reset).

Summary of Contents for KWT 6833 SG









































































Search results

Summary of Contents for KWT 6833 SG

Reviews:

Related manuals for KWT 6833 SG

Brands by name

Popular brands

Miele KWT 6833 SG, Operating And Installation Instructions

Search results

Summary of Contents for KWT 6833 SG

Reviews:

Related manuals for KWT 6833 SG

Brands by name

Popular brands