Miele KWT 6833 SG Operating And Installation Instructions Download

Page: 7 / 72

Warning and Safety instructions

Safety with children



Children under 8 years of age must be kept away from the wine

conditioning unit unless they are constantly supervised.



Children aged 8 and older may only use the wine conditioning unit

without supervision if they have been shown how to use it in a safe
manner. Children must be able to understand and recognise the
possible dangers caused by incorrect operation.



Children must not be allowed to clean or maintain the wine

conditioning unit unsupervised.



Please supervise children in the vicinity of the wine conditioning

unit and do not let them play with it.



Danger of suffocation! Whilst playing, children could become

entangled in packaging (such as plastic wrapping) or pull it over their
head and suffocate. Keep packaging material away from children.

Summary of Contents for KWT 6833 SG









































































Search results

Summary of Contents for KWT 6833 SG

Reviews:

Related manuals for KWT 6833 SG

Brands by name

Popular brands

Miele KWT 6833 SG, Operating And Installation Instructions

Search results

Summary of Contents for KWT 6833 SG

Reviews:

Related manuals for KWT 6833 SG

Brands by name

Popular brands